i2C FaceID V8 Programmer

139.99 €. incl. VAT
Only 1 left
BNP
Short description

 i2C FaceID V8 Programmer  
• Color: blue
• In stock


Description
• Model: i2C FaceID V8 Programmer
 
• Offline read & write
• Support models: For iPhone X/XR/XS/XS Max/11/11 Pro/11 Pro Max/12/12Pro/12Mini/12ProMax
• Support Chinese & English menu switch
• Non-trace repair, green pass the 3UTools
• Chip non-removal low repair risk
• Low power consumption and no current leakage
• Can be adapted to the latest iOS system perfectly
 
• Operation Process
1. Connect with the original flex cable, press the ‘Test’ button to test the flex cable condition
2. Press the ‘Read’ button to read and save the data (Do not power off during the operation process to avoid loss of data )
3. Connect the i2C dot projector flex cable with the host machine, then press the ‘Write’ button to write the data. (Do not power off during the operation process to avoid loss of data)
4. Cut off the shielding cover soldering joint pads with grinding pen
5. Heat with a hot air gun and separate the dot projector board from the glass lens with a sculpture knife
6. Take down the MOSFET then short the pin as shown in the figure
7. Reball the pads on the flex cable
8. Apply solder paste then solder the dot projector board to the flex cable
9. Test the flex cable working condition after the soldering
10. Put the flex cable into the shielding cover and keep the flex well aligned with the glass lens
 
• Compatibility: Apple iPhone X, iPhone XS, iPhone XS Max, iPhone XR, iPhone 11, iPhone 11 Pro, iPhone 11 Pro Max, iPhone 12 mini, iPhone 12, iPhone 12 Pro, iPhone 12 Pro Max, iPad A12x

• In the box:
- 1 х i2C FaceID Programmer
- 1 х USB-C cable
- 1 х flex cable for iPhone 12 series
- flex cables for iPhone X/XS/XS Max/XR/11/11 Pro/11 Pro Max/12 mini/12-12Pro/12 Pro Max

• Notice:
1: The flex cable can only be used with the IFace V8  programmer;
2: The  flex cable  cannot be used separately;
3: If there is no programmer, the flex cable can not be used.
 
• i2C Face V8 Programmer Fix iPhone Face ID Not working on X-11 pro max, Face ID Repair Tool - Iface Pro V8 Programmer, don't need to disassemble & Reballing the encrypted chip, just replace the dot matrix cable, repair iPhone Face ID issues no working

Warranty: 24 months

Product number (item): 55469

Reviews, ratings and comments
Rate i2C FaceID V8 Programmer - програматор за FaceID (с лентови кабели)
Comments /0/