Glastify OTG Plus 2.5D Tempered Glass 2 Pack for iPhone 14 Pro Max (clear)

Glastify OTG Plus 2.5D Tempered Glass 2 Pack - 2 броя калени стъклени защитни покрития за дисплея на iPhone 14 Pro Max (прозрачен)

14.99 €. incl. VAT

Only 2 left

Check availability

Asenovgrad - The product is in stock

Sofia - Младост 4 - The product has been exhausted

Sofia - Ст.планина - The product has been exhausted

Plovdiv - The product has been exhausted

Short description

• Glastify Tempered Glass Pack

• Color: clear
• In stock

Description

• Manufacturer: Glastify

• Model: OTG Plus 2.5D Tempered Glass 2 Pack

• Factory number: GST028

• EAN: 9589046925023

• GlasTIFY OTG + tempered glass is made of light and milled AGC glass with a thickness of only 0.28mm.

• In the production process, it was hardened at 420 ° C, thanks to which it has a surface hardness of 9H, which provides the highest level of protection during everyday use and absorbs the force of an impact.

• OTG + is a crystal clear glass that does not affect the sensitivity of touch and saturation of the displayed colors. In addition, it is covered with a high-quality hydrophobic and oleophobic coating, which minimizes the number of fingerprints.

• The glass is precisely made and fully functional. Remember that you get 2 lenses in the set.

• The glass is compatible with most casings available on the market, the die is "Case Friendly".

• 100% Original

• Packed in original packaging

• 9H hardness

• Adapted to the flat part of the screen

• 2.5D milled edges pleasant to the touch

• Hydrophobic layer

• Oleophobic layer

• Perfectly transparent

• Does not affect touch sensitivity

• Compatibility: Apple iPhone 14 Pro Max (6.7" 2022)

• In the Box:

- 2 x Glastify Screen Shield Tempered Glass

- 1 x installation kit

• INSTALLATION INSTRUCTIONS:

1) Begin installation in the bathroom right after bathing - the steam will absorb all the dust from the atmosphere and it will not interfere with the installation.

2) Thoroughly clean and degrease the screen surface, then use a dry cloth to polish it to a shine.

3) Install the coating as evenly as possible - you can position it with two sheets of tape, sticking them to the side of the device.

4) Get rid of air bubbles by firmly pressing the whole thing with circular movements for several dozen seconds. Do this so that the adhesive layer adheres to the screen as tightly as possible.

Product number (item): 58501