iFace Pro Plus FaceID Programmer
44.99 €. incl. VAT
Only 2 left 
• iFace Pro Plus FaceID
• Color: black
• In stock
• Model: iFace Pro Plus FaceID Programmer
• Support to check if the face dot matrix
• It is normal, and the functions like fuse,
• NTC disconnected, I2C disconnected,
• Short circuit etc.
• Read the data of Dot projector, Support: X - 11Pro Max / iPad A12
• Support dot matrix encrypted data read & backup,
• the burning function will be opened in future.
• iFace Pro Dot Matrix Programming Face ID Repair Tester One Click To Detect Dot Projector for Iphone X Xr Xsmax 11 Pro Burning IC
• Repair face problem is the original face problem to repair, can not transfer another motherboard face directly to the new motherboard. Repairing faces is a highly technical job that requires face IC replacement and programming.
• LB iFace Pro matrix tester dot projector tester for iPhone X XR XS Max 11 Pro iPad A12 face ID test repair tools, quick diagnosis face ID test repair machine for iPhone iPad repair, LB iFace Pro dot matrix tester for iPhone face ID diagnosis repair, LB iFace face dot matrix repair tester support for iPad A12 iPhone X XS XS Max 11 Pro Max motherboard diagnosis repair
• LB iFace Pro Dot Matrix Projector Restoration Tester For iPhone X XS XS MAX 11 Pro Max iPad A12 Face ID Diagnosis Repair
• Operation Process
1. Connect with the original flex cable, press the ‘Test’ button to test the flex cable condition
2. Press the ‘Read’ button to read and save the data (Do not power off during the operation process to avoid loss of data )
3. Connect the i2C dot projector flex cable with the host machine, then press the ‘Write’ button to write the data. (Do not power off during the operation process to avoid loss of data)
4. Cut off the shielding cover soldering joint pads with grinding pen
5. Heat with a hot air gun and separate the dot projector board from the glass lens with a sculpture knife
6. Take down the MOSFET then short the pin as shown in the figure
7. Reball the pads on the flex cable
8. Apply solder paste then solder the dot projector board to the flex cable
9. Test the flex cable working condition after the soldering
10. Put the flex cable into the shielding cover and keep the flex well aligned with the glass lens
• Compatibility: Apple iPhone X, iPhone XS, iPhone XS Max, iPhone XR, iPhone 11, iPhone 11 Pro, iPhone 11 Pro Max, iPhone 12 mini, iPhone 12, iPhone 12 Pro, iPhone 12 Pro Max, iPad A12x
• In the box:
- 1 х iFace Pro Plus FaceID Programmer
- 1 х USB-C cable
• Warranty: 24 months
• In the box:
- 1 х iFace Pro Plus FaceID Programmer
- 1 х USB-C cable
• Warranty: 24 months
Product number (item): 55471
Reviews, ratings and comments
/0/