Ringke Privacy Tempered Glass for Samsung Galaxy S23 Plus
19.99 €. incl. VAT
• Ringke Tempered Glass
• Color: clear• Out of stock
• Manufacturer: Ringke
• High-quality Ringke TG tempered glass with a protective filter function is the perfect way to protect the screen from damage and limit its visibility to outsiders
• The polarizing film at a certain angle blocks the light emitted by the display, thanks to which the effect was achieved as in the case of ATMs
• The glass has a thickness of 0.3 mm and a hardness of 9H, which is a sufficient value to effectively protect the screen, with high resistance of the glass itself to superficial scratches
• Compatibility: Samsung Galaxy S23 Plus
• Model: Privacy Tempered Glass
• Factory number: RGK1772
• EAN: 8809919301756
• High-quality Ringke TG tempered glass with a protective filter function is the perfect way to protect the screen from damage and limit its visibility to outsiders
• The polarizing film at a certain angle blocks the light emitted by the display, thanks to which the effect was achieved as in the case of ATMs
• The glass has a thickness of 0.3 mm and a hardness of 9H, which is a sufficient value to effectively protect the screen, with high resistance of the glass itself to superficial scratches
• It has also been covered with an oleophobic layer, which reduces the degree of leaving fingerprints on the screen
• Scratch resistance up to 9H
• 0.3mm thick tempered glass
• It has an oleophobic layer
• Contoured 2.5D edges
• Does not affect touch sensitivity
• 0.3mm thick tempered glass
• It has an oleophobic layer
• Contoured 2.5D edges
• Does not affect touch sensitivity
• In the Box:
- 1 x Ringke Privacy Tempered Glass
- 1 x Wiping Cloth
- 1 x Dust Prevention Sticker
- 1 x Alcohol Bag
• INSTALLATION INSTRUCTIONS:
1) Begin installation in the bathroom right after bathing - the steam will absorb all the dust from the atmosphere and it will not interfere with the installation.
2) Thoroughly clean and degrease the screen surface, then use a dry cloth to polish it to a shine.
3) Install the coating as evenly as possible - you can position it with two sheets of tape, sticking them to the side of the device.
4) Get rid of the air bubbles by firmly pressing the whole thing in circular movements for several dozen seconds. Do this so that the adhesive layer adheres to the screen as much as possible.
Product number (item): 61461
Reviews, ratings and comments
/0/